The Fresair 18L Reservoir includes an injection and return line to conveniently flow water to the unit and return water from the unit. This allows for recirculation and helps to conserve water.
The pump connects to the water lines in order to pump the water to its destination.
A float sensor is included to monitor low water levels. A light will blink on the control panel alerting you when the reservoir needs to be refilled.
Combining the Fresair 18L Reservoir with our 12V Air Cooler can reduce temperature up to 40ºF combined with the use of ventilation and air flow.
Water Return Line
Electrical Harness: Negative Connection
Electrical Harness: Fuse
Electrical Harness: Positive Connection
Water Injection Line
Float Sensor
Water Pump & Connector
It can be mounted either horizontally or vertically and arrives with its own mounting brackets.
On average, consumption is around 1L per hour, however, this information depends on a number of variables such as ambient temperature, exterior temperature, running mode, fan speed, level of use, etc.
The Fresair 18L Reservoir simply needs tap water. No chemicals or additives are needed for it to function.
No, ice will not hurt the system but it is not necessary as the difference in thermal sensation will be minimal.
The sensor buoy is attached to the water tank and monitors the water level. If the tank is full and the low water warning light remains on, check that the sensor is inserted correctly in the reservoir with the green dot facing up. If the sensor is inserted correctly and the light remains on it should be replaced.
The return pump is located in the tray and returns excess water to the reservoir.
We recommend replacing the injection pump every 12 months.
More information can be found in the maintenance section of the owner’s manual.