When installing the system be careful not to pinch or crimp the return hose. If this hose is pinched or crimped water will not flow correctly back to the reservoir, resulting in water leaking from the top of the unit.
The system must be level and slightly facing downward in the front. If you overtighten the mounting bolts causing the base of the unit to curve downward – water will leak from the top of the unit. It is very important to use the included foam to create a seal around the outside of the […]
We recommend the below steps to troubleshoot each pump. Inspect return pump – Please reflect back to owner’s manual for proper maintenance. The return pump is programmed to turn on just after the injection pump to ensure there is never any excess water sitting inside the top of the unit.
The excess water that travels through the pine filter goes through water channels and passes through (2) additional sub filters ending up inside the small reservoir built into the front of your Fresair. The return pump is located inside the small reservoir which takes all excess water and pumps it back into the main reservoir […]
