The sensor buoy is attached to the water tank and monitors the water level. If the tank is full and the low water warning light remains on, check that the sensor is inserted correctly in the reservoir with the green dot facing up. If the sensor is inserted correctly and the light remains on it […]
The return pump is located in the tray and returns excess water to the reservoir. We recommend replacing the injection pump every 12 months. More information can be found in the maintenance section of the owner’s manual.
The injection pump is located on the outside of the water reservoir and sends water to the Fresair unit. We recommend replacing the injection pump every 12 months. More information can be found in the maintenance section of the owner’s manual.
The Tray Pre-Filter is located in the tray and is responsible for a second filtering process, avoiding the entry of dirt into the pump, protecting the pump from clogging and breaking down. We recommend inspecting and gently washing the filter every 6 months. Dirt can gradually accumulate which over time lowers the equipment’s performance and […]
The evaporative straw or pine filter is located in the tray, external air is pulled through the moistened straw causing evaporation over a large surface area resulting in the cooling of the passing air which is delivered to the internal vents. It also filters out dust, insects, and acts as a humidifier in very low […]
We suggest performing preventative maintenance and replacing wearable parts every year (injection pump, return pump and pine filter bag), coinciding with your yearly vehicle maintenance. See full details within the owner’s manual.
