Maintenance: Return Pump
The return pump is located in the tray and returns excess water to the reservoir. We recommend replacing the injection pump every 12 months. More information can be found in the maintenance section of the owner’s manual.
Maintenance: Injection Pump
The injection pump is located on the outside of the water reservoir and sends water to the Fresair unit. We recommend replacing the injection pump every 12 months. More information can be found in the maintenance section of the owner’s manual.
Maintenance: Tray Pre-Filter
The Tray Pre-Filter is located in the tray and is responsible for a second filtering process, avoiding the entry of dirt into the pump, protecting the pump from clogging and breaking down. We recommend inspecting and gently washing the filter every 6 months. Dirt can gradually accumulate which over time lowers the equipment’s performance and […]
Maintenance: Tray Internal Filter
An internal filter located in the tray which is responsible for filtering the excess water descending from the straw filter. The water is then recycled and returned to the water reservoir. We recommend inspecting and gently washing the filter every 6 months. Excess amounts of dirt could prevent water from cycling through, possibly cause water […]
Troubleshooting: Pinched Return Line
When installing the system be careful not to pinch or crimp the return hose. If this hose is pinched or crimped water will not flow correctly back to the reservoir, resulting in water leaking from the top of the unit.
If parked on a slope for an extended period of time – Water is pumped up to the top of the unit every couple of minutes and if the excess water cannot reach the return pump due to the angle / slope of the vehicle, this can cause water can leak out from the top […]
Reservoirs: What functions occur after the water is pumped from the reservoir to the top of the unit?
The excess water that travels through the pine filter goes through water channels and passes through (2) additional sub filters ending up inside the small reservoir built into the front of your Fresair. The return pump is located inside the small reservoir which takes all excess water and pumps it back into the main reservoir […]