The sensor buoy is attached to the water tank and monitors the water level. If the tank is full and the low water warning light remains on, check that the sensor is inserted correctly in the reservoir with the green dot facing up. If the sensor is inserted correctly and the light remains on it […]
What you’ll need: Supplied Water Lines/Tubes, Water Reservoir, Zip Ties, Water, *Plumbing tape Out of the box the reservoir is set up for horizontal mounting but can also be mounted vertically by moving the float sensor and injection pump. Choose an orientation that supports easy access so that you can connect the water lines, easily fill […]
The excess water that travels through the pine filter goes through water channels and passes through (2) additional sub filters ending up inside the small reservoir built into the front of your Fresair. The return pump is located inside the small reservoir which takes all excess water and pumps it back into the main reservoir […]
There are a few options here. You could connect the S7i ‘in’ hose to the vans pressurized water supply through a valve you could open, just like you connect to a sink faucet. The ‘out’ hose could just vent outside or back to the main tank. The S7i works well for teardrops or step-vans where […]
No, ice will not hurt the system but it is not necessary as the difference in thermal sensation will be minimal.
For step vans and van conversions, there is a larger 18L flat reservoir (installs vertically or horizontally internally) that can be filled by hose, by a pump from your main water tank, or the unit can even be connected directly to your main tank. Alternatively, the S7i has an internal reservoir, within and out hoses. […]
